Bostwick Type Folding Gates - Miller Wire Works - Specifications For Bostwick Type Folding Gates

BUILDING PRODUCTS:
Partitions
Guards
Folding Gates
Railing Panels
Woven Wire Mesh

AGGREGATE & MINING_PRODUCTS:
Wire Screens
Urethane Screens
Rubber Screens
Perforated Plate
Belt Scrapers
Conveyor Slider Beds
Conveyor Idlers
Custom Molding
Gator Machinery
Asphalt Plant Wear Parts
Front End Loader Wear Parts
Paving Equipment Wear Parts
Side Rails
Bucker Strip
Tie-down Bars
Misc. Parts

TABLES & CHARTS
Screen Open Area
& Weight
Open Area Form

Credit Application
The application requires Acrobat Reader

Bostwick Type Folding Gates
SPECIFICATIONS FOR BOSTWICK TYPE FOLDING GATE

Vertical bars are two 3/4" X 3/8" cold rolled steel channel frames riveted together not over 6" o.c. Lattice bars are 5/8" X 3/16" flat bar with brass washers and machined channel guides on ends. Vertical end bars are cold rolled box track sections with ball bearing rollers for smooth operation. Gate can be fitted for cylinder lock or padlock lugs. All gates have self-locking tie back.

FINISH: Dipped in cleaning bath & painted one shop coat of enamel as selected from our standard colors.


No. 500-SINGLE BOSTWICK FOLDING GATE Three sets of lattices for gates over 9'-6" high. Recommended maximum width 16'-0". Equipped with 2 1/4" X 2" top guide channel and bottom folding track with rubber floor pads and 4-wheel ball bearing carriages. Gate can be hinged, fixed or mounted to Type "A" or Type "B" cabinet. No. 501-DOUBLE BOSTWICK FOLDING GATE Same as single gate except maximum recommended width 24'-0".		No. 502-SINGLE BOSTWICK FOLDING GATE Three sets of lattices for gate over 9'-6" high. Recommended maximum width 16'-0". Equipped with stationary top track with rollers and bottom folding track with rubber floor pads and 4-wheel ball bearing carriages for easy operation. Gate can be fixed or mounted to Type "A" cabinet. No. 503-DOUBLE BOSTWICK FOLDING GATE Same as single gate except maximum recommended width 24'-0".

No. 504-SINGLE BOSTWICK FOLDING GATE Recommended maximum width 8'-0" X 7'-6" high. Gates over 6 feet wide will have jackknife brace for added rigidity. Gate can be hinged, fixed or mounted to Type "A" or Type "B" cabinet. No. 505-DOUBLE BOSTWICK FOLDING GATE Same as single gate except maximum recommended width 12'-0".		No. 506-SINGLE BOSTWICK FOLDING GATE Recommended maximum width 12'-0" X 7'-6" high. Equipped with jackknife brace and bottom folding track with rubber floor pads and 4-wheel ball bearing carriages for added rigidity. Gate can be hinged, fixed or mounted to either Type "A" or Type "B" cabinet. No. 507-DOUBLE BOSTWICK FOLDING GATE Same as single gate except maximum recommended width 16'-0".

No. 508-SINGLE BOSTWICK FOLDING GATE Recommended maximum height 7'-6". Equipped with top and bottom folding track and 4-wheel ball bearing carriages for easy operation. Bottom track has rubber floor pads. Gate can be hinged, fixed or mounted to Type "A" or Type "B" cabinet. Maximum Corridor width 16'-0" without Cabinet. Maximum Corridor width 16'-0" with Shallow Wall Cabinet. Maximum Corridor width 12'-0" with Deep Wall Cabinet.		No. 509-DOUBLE BOSTWICK FOLDING GATE Recommended maximum height 7'-6". Equipped with top and bottom folding track and 4-wheel ball bearing carriages for easy operation. Bottom track has rubber floor pads. Gate can be hinged, fixed or mounted to Type "A" or Type "B" cabinet. Maximum Corridor width 16'-0" without Cabinet. Maximum Corridor width 16'-0" with Shallow Wall Cabinet. Maximum Corridor width 12'-0" with Deep Wall Cabinet.

Constructed of formed 12 gauge steel sheets with 3/16" thick door and face trim. Cabinet door will remain open when gate is extended. Any standard 1 5/32" diameter cylinder can be used in lock.		Constructed of "Z" bar with 16 gauge steel sheet door and back. Door can be closed while gate is extended. Any standard 1 5/32" diameter cylinder can be used in lock.