| SPECIFICATIONS |
|
| Mesh |
1½" Diamond--Intermediate Crimped |
| Wire |
No. 10 W & M Gauge |
| Vertical Channel |
1¼" x 5/8" "C" Type with ¼" Bolts |
| Horizontal Channel |
1" x ½" |
| Center Reinforcement |
Double: Two 1" x ½" CR Channel Bolted Each Side of Mesh |
| Corner Post |
1¾" x 1¾" x 1/8" Angle |
| Top Reinforcement |
2¼" x 1" Channel: Fastened with ¼ "U" Bolts. Approx. 24" on Center. |
| Floor Sockets |
1¼" x 1¼" x 2½" High-Ductile Iron (Weldable) |
| Sliding Door Frame |
1½" x ¾" Channel |
| Swinging Door Frame |
1¼" x ½" Channel |
| Hardware |
Mortise Type Lock operated by key outside, recess knob inside. Spring catches on Pass Windows. |
| FINISH: |
Dipped in cleaning bath & painted one shop coat enamel. Color as selected from our standard colors. Hot dip galvanized optional. |
| Bracing: |
Free Standing Partitions to Have 3" Channel Line Post Approx. 15'-0 to 20'-0 on Centers with 8" x 16" x ¼" Base Plates. |
| SPECIFICATIONS |
|
| Mesh |
1½" Diamond -- Intermediate Crimped |
| Wire |
No. 10 W & M Gauge |
| Vertical Channel |
1¼" x 5/8" "C" Type with ¼" Bolts |
| Horizontal Channel |
1" x ½" |
| Center Reinforcement |
Double: Two 1" x ½" CR Channel Bolted Each Side of Mesh |
| Corner Post |
1¾" x 1¾" x 1/8" Angle |
| Top Reinforcement |
2¼" x 1" Channel: Fastened with ¼" "U" Bolts. Approx. 24" on Center. |
| Floor Sockets |
1¼" x 1¼" x 2½" High-Ductile Iron (Weldable) |
| Sliding Door Frame |
1½" x ¾" Channel |
| Swinging Door Frame |
1¼" x ½" Channel |
| Metal Base |
No. 16 Gauge Sheet Metal |
| Hardware |
Mortise Type Lock Operated by key outside, recess knob inside. |
| FINISH: |
Dipped in cleaning bath & painted one shop coat enamel. Color as selected from our standard colors. Hot dipped galvanized optional. |
| BRACING: |
Free Standing Partitions to Have 3" Channel Line Post Approx. 15'-0 to 20'-0 on Centers with 8" x 16" x ¼" Base Plates. |
| SPECIFICATIONS |
|
| Mesh |
2" Diamond -- Intermediate Crimped |
| Wire |
No. 6 W & M Gauge |
| Frame |
1½" x ¾" Channel with ¼" Bolts. |
| Center Reinforcement |
Two 1¼" x 5/8" CR Channels Bolted Each Side of Wire |
| Corner Post |
1¾" x 1¾" x 1/8" Angle |
| Intermediate Post |
2½" x 3/8" Flat Bar |
| Top Reinforcement |
3" Channel fastened with ¼" "U" Bolts |
| Floor Sockets |
2½" x 3/8" x 2½" High Ductile Iron (Weldable) |
| Hardware |
Mortise Type Lock operated by key outside, recess knob inside. Spring catches on Pass Windows. |
| FINISH: |
Dipped in cleaning bath & painted one shop coat enamel. Color as selected from our standard colors. Hot dipped galvanized optional. |
| BRACING: |
Free Standing Partitions to Have 3" Channel Line Post Approx. 15'-0 to 20'-0 on Centers with 8" x 16" x ¼" Base Plates. |
